Residual Coal-Fire Evidence After Control Operations in a Mining Critical Zone, Inner Mongolia, China

Authors

  • Jiahao Liu Marist Brothers International School, Beijing 100103, China; School of Chemical Sciences, University of Chinese Academy of Sciences, Beijing, China
  • Shitao Zhang Inner Mongolia Taixi Coal Group Co., Ltd., Alxa Left Banner, Inner Mongolia 750306, China
  • Rong He Inner Mongolia Taixi Coal Group Co., Ltd., Alxa Left Banner, Inner Mongolia 750306, China
  • Xiongfei Zhang Inner Mongolia Taixi Coal Group Co., Ltd., Alxa Left Banner, Inner Mongolia 750306, China
  • Yao Xiang School of Chemical Sciences, University of Chinese Academy of Sciences, Beijing, China

DOI:

https://doi.org/10.63593/JPEPS.2026.09.04

Keywords:

UAV thermal infrared, DInSAR, post-remediation monitoring, gangue pile, carbon monoxide

Abstract

A reduction in mapped surface fire area is commonly interpreted as evidence of coal-fire control, but it does not necessarily reflect the state of a three-dimensional subsurface combustion system. Here, we analyze field measurements and survey products collected during investigations conducted in 2021 and January 2024 in the Erdaoling mining area of the Gulangben coalfield, Inner Mongolia, China. The 2024 survey covered approximately 10.63 km2 and integrated UAV thermal-infrared imagery, UAV-derived orthophotography, ground observations, DInSAR deformation data, and borehole measurements. A total of 71 high-temperature anomalies were identified, including 44 fire-zone units covering 81,252.80 m2 and 27 high-temperature gangue-pile units covering 95,957.27 m2. The 2021 investigation reported a mapped fire area of 83,241 m2; however, differences in survey extent and anomaly-classification procedures preclude a formal estimate of fire-area decay. Field observations documented fire-zone surface temperatures of 40–165 °C, flame temperatures of 630-800 °C, borehole temperatures of approximately 64.6-82.5 °C, and CO concentrations of approximately 276-1000 ppm at selected boreholes. Two open-fire points exceeding 380 °C were also identified in 2024. Fire-zone units were spatially associated with steeply dipping coal seams, mined ground, goafs, and fractured zones, indicating that geological conditions and mining disturbance jointly define the spatial context of residual combustion, although the relative contribution of individual structural factors remains unresolved. The results demonstrate that fire-zone delineation, hot-gangue-pile identification, field temperature and gas observations, borehole anomalies, and DInSAR deformation provide complementary but non-equivalent evidence. A reduction in mapped surface fire area alone is therefore insufficient to verify subsurface fire extinction.

Downloads

Published

2026-11-09

Issue

Section

Articles