Research Progress of Bone Implant Additive Manufacturing

Authors

  • Xiaoning Liu School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Hongshan San School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Zhenhao Li School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Guoqing Xiao School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Wei Wang School of Emergency Management, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Qiang Guo School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Chenxu Luo School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China
  • Zhibo Yang School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, People’s Republic of China

Keywords:

bone implant, additive manufacturing, bone scaffold

Abstract

Bone implants are currently a solution for the treatment of large bone defects. The structural design and manufacture of complex bone tissue engineering scaffolds can be realized by using additive manufacturing technology. Advances in additive manufacturing techniques and the continued emergence of related materials provide different opportunities for new bone implant techniques to achieve the challenging requirements of proposed bone implants. The purpose of this review is to present the current status and analyze the advantages and disadvantages of various additive manufacturing for the manufacturing of bone implants. Five different manufacturing techniques (multilayer deposition forming, ink direct writing, laser melting, laser sintering, and light curing are reviewed.) and the currently required bone implants technology, and thus put forward the research and development direction of additive manufacturing suitable for bone implants.

Downloads

Published

2023-10-26

How to Cite

Xiaoning Liu, Hongshan San, Zhenhao Li, Guoqing Xiao, Wei Wang, Qiang Guo, Chenxu Luo, & Zhibo Yang. (2023). Research Progress of Bone Implant Additive Manufacturing. ournal of nnovations in edical esearch, 2(10), 36–54. etrieved from https://www.paradigmpress.org/jimr/article/view/837

Issue

Vol. 2 No. 10 (2023): October

Section

Articles